Our moulds are a good way to start out with your resin trials or if your just looking for a new fun shape. We have plenty of those.
Silicone moulds are good for resin and clay however they are not bakeable. Pinkysil moulds are not suitable for food use.
Rings are handmade using flat acrylic, extras for filling are domed earring pieces/blanks and Pinkysil or ArtSil silicone.
Please see picture 2 above for measurements.
Rings are flat size Q 1/2 17mm inner diameter. You choose the depth. Either standard 3mm or 2mm for stacking rings.
Extras for filling are approximately 5mm depth. The base is 3mm and then domed with shiny resin.
To prolong the use of your mould please avoid applying open flame to the mould. If you need to remove bubbles in your resin apply heat to resin in the mixing cup.
You will want to care for your silicone moulds so they last but silicone moulds don't last forever.
Store your moulds flat and on a level surface. I would suggest cling wrapping your moulds to prevent them collecting dust. Heat can cause moulds to breakdown faster than usual. Please store your moulds in a dry, cool place and away from direct sunlight. Do not cut your moulds. This may cause the mould to loose shape.
Wash your moulds with warm mild soapy water before storing. You can use a soft, non abrasive cloth to clean. Try not to scratch your moulds. Avoid cleaning with alcohol. Your moulds are not dishwasher safe. Dry your moulds before storing.
You can use a silicone releasing agent to aid and prolong the life of your mould.
I absolutely encourage you to sell the pieces you make from my moulds. I only ask you have fun and be original. *We do not allow you to reproduce our original mould designs for resale of moulds. These designs are original HyperResin designs and protected under copyright law of artist work.
Creating moulds for others to use has been something I have wanted to do for a long time.
*Please note that with all handmade items there can always be slight imperfections 100% unique.